We service both air-source and ductless heat pump systems.
Auxiliary heat strip issues are checked alongside the heat pump itself.
If you're dealing with a system stuck blowing cold air in heating mode, an outdoor unit that's iced over and won't run its defrost cycle, or a system that switches modes but never actually reaches set temperature, you already know a heat pump that seems to be 'not heating' is often actually a reversing valve or defrost cycle problem, which a technician trained mainly on standard AC systems can easily misdiagnose.

Waiting rarely saves money and often turns a same-day repair into a longer, more involved job.
AAA Pro HVAC built its heat pump repair process around one idea: diagnose first, quote honestly, fix it right.
Every truck across Edmonds, WA carries the tools and common parts specific to heat pump repair, so most calls finish in a single visit.

Our techs are specifically trained on reversing valves, defrost boards, and auxiliary heat systems, not just general AC repair logic.
Heat pumps run in both summer and winter, so we treat heat pump failures as urgent regardless of season.
Auxiliary heat strip diagnostics are included in the same visit when relevant.
Refrigerant charge is verified against heat pump-specific specs, which differ from standard AC charging.
From the first symptom to the final fix, these are the specific heat pump repair services our Edmonds-area crews are equipped for.
We test the valve's solenoid directly rather than assuming based on symptoms alone. Techs handling reversing valve diagnosis & repair carry the specific parts and tools this job calls for, not a generic kit.
An outdoor unit that ices over and never defrosts usually points to a failed defrost thermostat or control board timing issue. This is one of the most requested heat pump repair calls we get across Edmonds, WA.
We test heat strip elements and the relay controlling them separately. Techs handling auxiliary / emergency heat strip repair carry the specific parts and tools this job calls for, not a generic kit.
We charge to the manufacturer's heat pump-specific target, not a generic number. Techs handling refrigerant charge & leak detection carry the specific parts and tools this job calls for, not a generic kit.
We distinguish between the two before recommending any repair. Techs handling outdoor unit icing diagnostics carry the specific parts and tools this job calls for, not a generic kit.
Indoor head unit and outdoor condenser are diagnosed as a connected system. This is one of the most requested heat pump repair calls we get across Edmonds, WA.

Describe whether the system is stuck in one mode, iced over, or not heating/cooling at all.
We confirm your Edmonds address and a realistic arrival window.
Flat-rate pricing follows the confirmed diagnosis.
Workmanship is guaranteed and documented on your invoice.

Previous company just topped off refrigerant twice — this tech found the stuck reversing valve in ten minutes.
Turned out the defrost thermostat had failed, so it never actually triggered the defrost cycle.
Auxiliary heat strips weren't kicking in during a cold snap and the house couldn't keep up.
Ductless heat pump in the addition threw a code I couldn't find anywhere online.

Often a stuck reversing valve, which controls whether the system is in heating or cooling mode.
If the unit stays iced for more than an hour, that's worth a service call.
A technician needs specific training on these components to diagnose heat pump issues accurately.
Heat pumps naturally work harder as outdoor temperatures drop, and auxiliary heat should engage below a certain threshold.
Yes — indoor head units and outdoor condensers on ductless heat pump systems are within our service scope.
Call for a live arrival estimate based on current demand.

Whether you're in the heart of Edmonds or one of the surrounding communities, dispatch routes the closest available technician.
☎ Call +1-866-805-8548 for Edmonds Service